Cam Pitting

LISTEN UP EVERYONE, the problem with buckets, rockers, and especially the CAM LOBES themselfs pitting is caused by,

USING THE CHOKE WHEN YOU START A COLD ENGINE!

This causes a cold engine(not much oil in top end yet) to rev at 3-4000rpms, causing this accelerated wear.

Don’t use much choke and let engine idle as slow as possible when you do use the choke.

This site is kindly funded by the politically correct folks at redmonkey.org

They are very helpful as long as you fill in your profile – your favourite dish had better be roasted nuts if you fail to adhere to this one and only site rule!